注塑成型中的尺寸和大尺寸
來源：無錫市達塑凱新材料
挖出零件以消除厚壁。 您可以在良好的模制部件中獲得相同的功能。 不必要的厚度會改變零件尺寸，降低強度，并需要進行后期加工。
、尺寸
| SIZE | 18.9 in. x 29.6 in. x 8 in. |
| VOLUME | 59 cu. in. |
| DEPTH | 4 in. from parting line |
| PROJECTED MOLD AREA | 175 sq. in. |
| SIZE | 480mm x 751mm |
| VOLUME | 966,837 cu. mm |
| DEPTH | 101mm from parting line |
| Up to 203.2mm if the parting line can pass through the middle of the part | |
| PROJECTED MOLD AREA | 112,903 sq. mm |
| MATERIAL | RECOMMENDED WALL THICKNESS |
| ABS | 0.045 in. - 0.140 in. |
| Acetal | 0.030 in. - 0.120 in. |
| Acrylic | 0.025 in. - 0.500 in. |
| Liquid Crystal Polymer | 0.030 in. - 0.120 in. |
| Long-Fiber Reinforced Plastics | 0.075 in. - 1.000 in. |
| Nylon | 0.030 in. - 0.115 in. |
| Polycarbonate | 0.040 in. - 0.150 in. |
| Polyester | 0.025 in. - 0.125 in. |
| Polyethylene | 0.030 in. - 0.200 in. |
| Polyphenylene Sulfide | 0.020 in. - 0.180 in. |
| Polypropylene | 0.035 in. - 0.150 in. |
| Polystyrene | 0.035 in. - 0.150 in. |
| Polyurethane | 0.080 in. - 0.750 in. |
| MATERIAL | RECOMMENDED WALL THICKNESS |
| ABS | 1.143mm - 3.556mm |
| Acetal | 0.762mm - 3.048mm |
| Acrylic | 0.635mm - 12.7mm |
| Liquid Crystal Polymer | 0.762mm - 3.048mm |
| Long-Fiber Reinforced Plastics | 1.905m - 25.4mm |
| Nylon | 0.762mm - 2.921mm |
| Polycarbonate | 1.016mm - 3.81mm |
| Polyester | 0.635mm - 3.175mm |
| Polyethylene | 0.762mm - 5.08mm |
| Polyphenylene Sulfide | 0.508mm - 4.572mm |
| Polypropylene | 0.635mm - 3.81mm |
| Polystynene | 0.889mm - 3.81mm |
| Polyurethane | 2.032mm - 19.05mm |
以上就是"注塑成型中的尺寸和大尺寸"文章的內容，如果您有采購需求，歡迎咨詢網站右上方的服務電話，我司將竭誠為您服務！
本文鏈接：http://www.xzchuliqi.com/news/js/235.html，本站部分文章轉載自互聯網，侵權請聯系刪除!
- 相關文章
- 工程塑料尼龍66熱塑性化合物
- 帝斯曼高溫尼龍66簡述
- PBT塑料和PET塑料結晶度的差異
- 塑膠原料激光焊接的醫藥級化合物和濃縮物
- 熱塑性塑料長纖維增加強度的優勢
- 工程塑料醫用級TPE塑料的優勢
- 威格斯PEEK塑料的應用表現
- 激光焊接工程塑料尼龍66塑料